• Fuel Type: Electric

• Dual Element

• 240 Volts

• 5200 Watts

• 21.6 Amps

• 48” L

• Mounting Height 8’-12’

• 9’x10’ Coverage Area

• Color options:

  • Stainless Steel

  • Black

  • White

• Fuel Type: Electric

• Dual Element

• 240 Volts

• 4000 Watts

• 16.7 Amps

• 39” L

• Mounting Height 8’-12’

• 8’x10’ Coverage Area

• Color options:

  • Stainless Steel

  • Black

  • Bronze

  • White

Infratech Flush Mount In-Wall Weatherproof Single Stacked Duplex Switch - 14-4310

Duplex switch gives the ability to turn each element on and off.

• Recommended to be used with CD & WD series installation.

• Duplex stack switches may be used with all dual element heaters.

• Ideal low-cost option for dual element heaters allowing you to turn on both elements or just one element for half power.

• 40 AMPs max per stack, 20 AMPs per switch

• Made in the USA

Infratech Flush Mount In-Wall Single Stacked Duplex Switch - 14-4300

Duplex switch gives the ability to turn each element on and off.

• Recommended to be used with CD & WD series installation.

• Duplex stack switches may be used with all dual element heaters.

• Ideal low-cost option for dual element heaters allowing you to turn on both elements or just one element for half power.

• 40 AMPs max per stack, 20 AMPs per switch

• Made in the USA

Infratech Surface Mount Weatherproof Single Stacked Duplex Switch - 14-4320

Duplex switch gives the ability to turn each element on and off.

• Recommended to be used with CD & WD series installation.

• Duplex stack switches may be used with all dual element heaters.

• Ideal low-cost option for dual element heaters allowing you to turn on both elements or just one element for half power.

• 40 AMPs max per stack, 20 AMPs per switch

• Made in the USA

Infratech Flush Mount In-Wall Weatherproof Dual Stacked Duplex Switch - 14-4315

Duplex switch gives the ability to turn each element on and off.

• Recommended to be used with CD & WD series installation.

• Duplex stack switches may be used with all dual element heaters.

• Ideal low-cost option for dual element heaters allowing you to turn on both elements or just one element for half power.

• 40 AMPs max per stack, 20 AMPs per switch

• Made in the USA

Infratech Surface Mount Weatherproof Dual Stacked Duplex Switch - 14-4325

Duplex switch gives the ability to turn each element on and off.

• Recommended to be used with CD & WD series installation.

• Duplex stack switches may be used with all dual element heaters.

• Ideal low-cost option for dual element heaters allowing you to turn on both elements or just one element for half power.

• 40 AMPs max per stack, 20 AMPs per switch

• Made in the USA

Infratech Flush Mount In-Wall Dual Stacked Duplex Switch - 14-4305

Duplex switch gives the ability to turn each element on and off.

• Recommended to be used with CD & WD series installation.

• Duplex stack switches may be used with all dual element heaters.

• Ideal low-cost option for dual element heaters allowing you to turn on both elements or just one element for half power.

• 40 AMPs max per stack, 20 AMPs per switch

• Made in the USA

Infratech - C-Series Drop Mount Pole (multiple colors)

Drop down poles for Infratech C-Series Heaters:

• Ability to Extend

  • Min: 29.00''

  • Max: 72.00"

• White Flush Mount Frame options for 39”, 48” and 61.25” Heaters

• Used to recess heaters into flat ceilings. The color of the heater will not be visible once recessed into the ceiling.

• For 39” heaters framing dimensions are 43” L x 11.75” W x 8” H

• For 48” heaters framing dimensions are 52” L x 11.75” W x 8” H

• For 61.25” heaters framing dimensions are 65.24” L x 11.75” W x 8” H

• Stainless Steel Flush Mount Frame options for 33”, 39”, 48” and 61.25” Heaters

• Used to recess heaters into flat ceilings. The color of the heater will not be visible once recessed into ceiling.

• For 33” heaters framing dimensions are 37” L x 11.75” W x 8” H

• For 39” heaters framing dimensions are 43” L x 11.75” W x 8” H

• For 48” heaters framing dimensions are 52” L x 11.75” W x 8” H

• For 61.25” heaters framing dimensions are 65.24” L x 11.75” W x 8” H

• Black Flush Mount Frame options for 39”, 48” and 61.25” Heaters

• Used to recess heaters into flat ceilings. The color of the heater will not be visible once recessed into the ceiling.

• For 39” heaters framing dimensions are 43” L x 11.75” W x 8” H

• For 48” heaters framing dimensions are 52” L x 11.75” W x 8” H

• For 61.25” heaters framing dimensions are 65.24” L x 11.75” W x 8” H

Infratech Single On/Off Flush Mount Switch with Gang Box and Weatherproof Cover - 14-4410

• Recommended to be used with C-series and Slimline installations.

• Ideal low-cost option for single element heaters

• 20 AMP per switch

• Wire your heater to the switch, then the switch to your electrical service panels

• Made in the USA

Infratech Dual On/Off Flush Mount Switch with Gang Box and Weatherproof Cover - 14-4415

• Recommended to be used with C-series and Slimline installations

• Ideal low-cost option for single element heaters

• 20 AMP per switch

• Wire your heater to the switch, then the switch to your electrical service panels

• Made in the USA

Infratech Single On/Off Surface Mount Switch with Gang Box and Weatherproof Cover - 14-4420

• Recommended to be used with C-series and Slimline installations.

• Ideal low-cost option for single element heaters

• 20 AMP per switch

• Wire your heater to the switch, then the switch to your electrical service panels

• Made in the USA

Infratech Single On/Off Wall Plate Switch and Gang Box - 14-4400

• Recommended to be used with C-series and Slimline installations.

• Ideal low-cost option for single element heaters

• 20 AMP per switch

• Wire your heater to the switch, then the switch to your electrical service panels

• Made in the USA

Infratech Dual On/Off Wall Plate Switch and Gang Box - 14-4405

• Recommended to be used with C-series and Slimline installations.

• Ideal low-cost option for single element heaters

• 20 AMP per switch

• Wire your heater to the switch, then the switch to your electrical service panels

• Made in the USA

Infratech Dual On/Off Surface Mount Switch with Gang Box and Weatherproof Cover - 14-4425

• Recommended to be used with C-series and Slimline installations.

• Ideal low-cost option for single element heaters

• 20 AMP per switch

• Wire your heater to the switch, then the switch to your electrical service panels

• Made in the USA

• Fuel Type: Electric

• Single Element

• 240 Volts

• 4000 Watts

• 16.7 Amps

• 63.5” L

• Weight: 17 lb.

• Mounting Height 8’-11’

• 10’x10’ Coverage Area

• Fuel Type: Electric

• Dual Element

• 20472 BTU

• 240 Volts

• 6000 Watts

• 25 Amps

• 61.25” L x 8” H x 8” W

• 20 lb.

• Mounting Height 10’-14’

• 11’x11’ Coverage Area

• Fuel Type: Electric

• Dual Element

• 13648 BTU

• 240 Volts

• 4000 Watts

• 16.7 Amps

• 39” L x 8” W x 8” H

• 16 lb.

• Mounting Height 8’-12’

• 8’x10’ Coverage Area

• Fuel Type: Electric

• Dual Element

• 10236 BTU

• 240 Volts

• 3000 Watts

• 12.5 Amps

• 33” L x 8” W x 8” H

• 14LB

• Mounting Height 7’-9’

• 7’x7’ Coverage Area

• Item number 21-4000-SS

• 120 Volts (plug in)

• 12.5 Amps

• 33” Length

• 6’ Cord

• Mounting Height of 6’-7’

• 5’x5’ Coverage Area